Teradek Bolt 4K 12G-SDI 750...

Teradek Bolt 4K 12G-SDI 750 TX/RX SetRecipient of Scientific and Engineering Award from the Academy of Motion Picture Arts and Sciences. Learn More. The Bolt 4K 750 TX/RX Set is a real-time wireless video transmission system that supports 1080p and 2160p video signals at 60FPS with less than 1ms of delay at up to 750 feet. Key features include increased range, faster reconnection times, easier setup with Bluetooth App for iOS or Android, and more stable connectivity. These devices are cross-compatible with the entire Bolt 4K Family. Includes integrated 1/4″x20 and M3 mounting points. Optional Battery Plates are sold separately.Real-Time 4K Wireless Video Transmit and receive uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 feet of range.True HDR Color Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.Rock-Solid Reliability Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.Universal Compatibility Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.Inputs/Outputs Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output. Receiver: 2x 12G-SDI, 1x HDMI 2.0Battery Plates Optional Gold Mount or V-Mount battery plate with pass-through power available on both TX & RX.Camera Metadata Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.Bolt App for iOS and Android Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.SpecificationsBolt 4K 750 TX No MountVideo – Video Inputs 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) Video Outputs 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit Delay Tx To Rx <0.001sec Input Cross Conversion Yes, HDMI to SDISupported Resolutions – Supported Resolutions 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p50 576p59.94/60 480i(NTSC)/576i(PAL)Video Processing – Video Compression Visually Lossless Video Format Conversion Support Connect an HD source to the Tx and get a 4K signal out of Rx Connect a 4K source to the Tx, get HD resolution out of Rx You can also mix & match from a single source: 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx Input/output configurations are controlled directly on units or via Bolt 4K app Color Correction NoneAudio Processing – Audio Format 48kHz 24-bit PCMInputs – Audio Input Embedded SDI/HDMI Audio Input (2 Channel)Physical – Dimensions 132 x 91 x 27 mm Weight 358g (12.6 Oz) Construction Milled Aluminum(Chassis) and regulation-compliant PCB Mountability Multiple mounting options with 1/4″x20 and M3 holesInterfaces – Configuration Interfaces OSD with Menu, Joystick Navigation Switches On/Off Switch Usb Interface Functionality Upgrade via Micro-USBNetwork – Antennas 4 External 2dBi RP-SMA antennas (included) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz DFS Frequencies: 5.270 ~ 5.670 GHz Channel Bandwidth 13x 40MHz wide channels Rf Channel Selection Auto, Manual Manual available for non-DFS Channels Encryption AES-256, RSA-1024 key exchange Rf Power 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power) Range Up to 750 ft, line of sight Unicast Multicast Can connect one Transmitter to up to 6 Receivers Noise Rejection Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same locationPower – Power Input 2-Pin Circular locking Connector 6-28 VDC Battery None, optional Gold or V mount battery plate Nominal Power Consumption 20 WattsEnvironmental – Operating Temperature 0-40℃Bolt 4K 750 RX No MountVideo – Video Outputs 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit Delay Tx To Rx <0.001sec Input Cross Conversion Yes, HDMI to SDISupported Resolutions – Supported Resolutions 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p50 576p59.94/60 480i(NTSC)/576i(PAL)Video Processing – Video Compression Visually Lossless Video Format Conversion Support Connect an HD source to the Tx and get a 4K signal out of Rx Connect a 4K source to the Tx, get HD resolution out of Rx You can also mix & match from a single source: 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx Input/output configurations are controlled directly on units or via Bolt 4K app Color Correction 17x17x17 3D LUT (supports 10-bit color)Audio Processing – Audio Format 48kHz 24-bit PCM Outputs – Audio Output Embedded SDI/HDMI Audio Output (2 Channel)Physical – Dimensions 112 x 139 x 27 mm Weight 432g (15.2 Oz) Construction Milled Aluminum(Chassis) and regulation-compliant PCB Mountability Multiple mounting options with 1/4″x20 and M3 holesInterfaces – Configuration Interfaces OSD with Menu, Joystick Navigation Switches On/Off Switch Usb Interface Functionality Upgrade via Micro-USBNetwork – Antennas 5 External 2 dBi antennas (included) or optional Array Panel Antenna Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz DFS Frequencies: 5.270 ~ 5.670 GHz Channel Bandwidth 13x 40MHz wide channels Rf Channel Selection Auto, Manual Manual available for non-DFS Channels Encryption AES-256, RSA-1024 key exchange Rf Power 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power) Range Up to 750 ft, line of sight Unicast Multicast Can connect one Transmitter to up to 6 Receivers Noise Rejection Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same locationPower – Power Input 2-Pin Circular locking Connector 6-28 VDC Battery None, optional Gold or V mount battery plate Nominal Power Consumption 18 Watts Environmental – Operating Temperature 0-40℃